M4:D40 (D340) Increase Intensity With Negatives
Intensity comes in many forms. One method that most people never even consider is negatives. A negative is where you use more than your normal weight and have a partner help you get the lift to the end of the positive movement and then you execute, on your own, the negative portion of the movement. For instance, if you were working your chest today and decided to use negatives on your barbell bench press, what you'd do is have your partner help you unrack the weight. You would then control the weight on the way down to your chest. Your partner would assist you in getting the weight back to the top. You'd repeat this over and over. Be careful when doing negatives. Negatives cause the most muscle soreness and they also tend to leave you more open for injury. Always have someone spotting you when doing negatives. Because the actual lift is very slow and controlled you want to give more rest time between sets. Negatives are used in many programs to increase your strength on a given exercise. It is a great way to up your maximum bench press weight. It is also a great way to get yourself into dips without any assistance. You can use negatives in a variety of ways. |
||
|
||
After not being satisfied at all with my Friday workout, I spent some time discussing things with my trainer, Carlos DeJesus. Carlos suggested that I mustn't be getting enough recovery time between workouts for me to lose the fire at this point. It has been 3 weeks on the H.I.T. program for me. Carlos has stated that I must be working extremely hard to get to this point. As a result of the discussions this weekend with Carlos, I am going to be cutting back to two full body workouts each week–one on Monday and one on Thursday. This will allow for maximum recovery time. I must say, I entered the gym today completely motivated. I hadn't felt this way in a week. I attacked the weights like a hungry tiger would attack a raw steak. Let me take you through the workout and you will see what I mean. I sat down at the Thigh extension machine and put the pin at 190 and then added 5 pounds for a total of 195. I began my slow 3 second ascent and 3 second descent. I controlled this for 9 repetitions. My thighs were screaming in pain. The heat was apparent in my legs as they were turning red from blood rushing to the muscles. I pushed a 10th repetition out of my legs with great form. I then pushed an 11th repetition out of my legs with wonderful form. I hit my 12th repetition and I thought "I need to go for another" so I gave it a shot, but the 13th repetition was not to be. I had hit complete failure on this exercise. I moved to the thigh curl machine. I put the pin at 150 pounds. I cranked out 5 repetitions before I could feel lactic acid forming in my hamstring area. I pushed hard and managed to pump our 4 more repetitions. I tried for the 10th, but it was not to be and I was unable to get the weight up. After using the entire rack for my standing calf raises on the previous workout, I switched to using the leg press machine for my calf raises. I loaded the sled with 340 pounds and proceeded to push myself in brutal fashion. At around 10 repetitions my brain said I should give up, but I pushed on. At 15 repetitions my legs were quivering, but I continued to push forward. I managed to push out 25 repetitions before having to put the safety back in place. I got up from the sled and my legs were a quivering mess. Next up was squats. Even though I've been rolling, my lower back was still a bit stiff, so I went a little easier on the squats, getting 8 reps at 225 pounds. For my Quad Blaster set I added weight and still managed to get in 10 repetitions before hitting complete failure. When I say complete failure on the Quad Blaster, I mean that I was able to go down to the low position of the movement, but not able to lift my body back up, so I collapsed to the floor. It is true failure. All the exercises continued in this fashion. Every single muscle group was stinging with pain by the time I was done with the workout. I was shaking all over and even felt like throwing up the breakfast I'd had before the gym. The intensity today was unparalleled. I was able to push myself to new heights on every exercise. Deadlifts were incredible! Not only did I add weight (255 pounds today) but I managed to add repetitions (9 instead of 8). Some have asked me why it is so difficult to lift 255 pounds when 425 is a weight I have handled in the past. The answer is the timed repetitions. I do these deadlifts 3 seconds on the way up and 3 seconds on the way down with only a second to reset my grip and repeat it again. The fire I feel in my low back and hamstrings is incredible and yet the weight is not even close to what I'm used to handling. Yet another notch for H.I.T. |
||
"If you like an exercise, chances are you are doing it wrong." Arthur Jones (inventor of the Nautilus) |
||
When was the last time you attacked the weights rather than the weights attacking you? Comment this post to answer the question. |
||
Until tomorrow…GET BACK TO LIFTING! |
Related Posts:
M4:D39 (D339) Increase Intensity With Giant Sets
Related Posts:
M4:D38 (D338) Increase Intensity With Super Sets
When trying to increase intensity, one of the most common methods is using super sets. A super set involves a number of different exercises for two or more body parts one after another. Body part number one is exercised and then body part number two, etc. You would use a moderate to heavy weight with minimal rest between exercises. The rest between the sets is between 2 to 5 minutes. This method is one of the most commonly used methods for upping the intensity of a lifting workout. If you were working your arms, you could efficiently use super sets to work your biceps and then your triceps. You could start out working your biceps by doing alternating dumbbell curls and then immediately go to skull crushers to work your triceps. When you complete one set of each exercise you have completed one super set and you would then rest before starting another super set. This methodology is common with workouts today because it allows you to get more done in a shorter amount of time. It makes your gym time more efficient and the intensity level much higher. You can then take the first two methods of increasing intensity and apply them to the super set technique. It is possible to use a drop set as part of the super set. You can also use timed repetitions with the super set. Coupling either of those two methods with the super set is going to give you one very intense burn in your muscles. << Return to series index |
||
|
||
Today I made a modification to my cardio training the way I had mentioned I would. My new plan is simple. I will do cardio only two times per week during my bulk. I will do a steady state session on Tuesday and then a spinning class for my intervals on Saturday. Today I took my first spinning class. It was intense. I was sweating profusely and my heart rate remained high the entire time. At the same time, when you do the spinning correctly, it works your legs, hamstrings and glutes. It was a massive cardio workout. Additionally, after consulting with Carlos DeJesus about the lack of fire in the belly during Friday's lifting, I have decided to cut back to two days a week lifting. Carlos had told me originally that this might happen. He warned me that recovery would eventually become an issue. To quote Carlos: "The stronger you get, the harder you can train My Experiment of One continues. |
||
Never be afraid to make changes to your program when your results indicate that change is required. |
||
Have you tried out any of the first three intensity methods I've mentioned and what did you think? Comment today's post to answer the question. |
||
Until tomorrow…GET BACK TO LIFTING! |
Related Posts:
M4:D37 (D337) Increase Intensity With Timed Repetitions
A few months have gone by and you are still interested in finding ways to increase the intensity of your lifting workouts. You now have tried drop sets and have seen some great results, but you are bored with that approach. What should you try next? Time repetitions are another way to increase the intensity of your lifting. The concept is that you lift with a certain cadence. You can do 2 seconds up and 2 seconds down or any number of ways. I personally have been using 3 seconds up and 3 seconds down using an electronic metronome to insure that I hit the exact rhythm. By slowing down your repetitions you are increasing the time under tension for the muscle group being worked. This adds an extreme amount of intensity to your lifts. You will naturally have to drop your weight in order to hit the correct rep range. What is interesting is how this effects the number of sets you have to do. I noticed that it was taking me about 20 seconds to complete an exercise to 10 reps. I would do 3 sets for a total of 60 seconds of work on the muscle group being trained. When I switched to the 3 x 3 cadence I was able to drop down to 1 set. You see that meant I was taking 60 seconds to complete 1 set of an exercise. This was equivalent to the workload for 3 sets of an exercise. This type of intensity allows you to get in and out of the gym quickly. Time under tension is extremely important when lifting. Your muscles work harder the longer they are kept under tension. Time repetitions increase the time under tension naturally. You also get to do a nice, slow, controlled rep, insuring that your form is accurate. This leads to greater growth from the better form that you are using. My legs have grown 0.5 inches in 3 weeks using the timed repetition method of intensity. I've even added 0.25 inches to my biceps, a muscle group I could never get to grow in the past. I've even lost an inch in my abdominal area and that is a result of holding in my abs when doing certain lifts as well as blasting them with the ab mat (I use timed repetitions on my ab work as well). If you want to up the intensity of your lifting, try using timed repetitions. << Return to series index. |
||
|
||
Honestly, I was not happy with my workout today. I did not feel the fire in the belly that I think I should have felt. I made progress on most of the exercises. I am now at the full rack on my standing calf raises and will have to start using a barbell across my back if I want to lift any heavier than where I am at now. I took it easy on squats because my lower back was stiff and sore and I didn't want to risk injury. As you review my log you probably wonder why I am unhappy with the workout. An example would be my deadlifts. A few workouts ago I did 255 x 8 and this time I managed 250 x 8. When I quit I immediately thought "You probably had 4 more repetitions in you if only you'd tried harder!" I was angry with myself. At the same time, I am not going to beat myself up over one (perceived) bad workout. I simply thought of my training philosophy — You can never train hard enough because you can always go harder than you just did. |
||
Don't sweat the small stuff. Have a bad workout? Vow to do better the next time! |
||
Do you feel you need to increase the intensity of your lifting workouts? Comment this post to answer the question. |
||
Until tomorrow…GET BACK TO LIFTING! |
Related Posts:
- « Previous Page
- 1
- …
- 44
- 45
- 46
- 47
- 48
- …
- 148
- Next Page »